Cembre

Points of View Categories Applications Catalogs

HEAT- SHRINKABLE TUBING
CodeTERMO-ROLL H3

on reel, continuous, printable on both sides

H3 type heat-shrinkable tubing is used to provide highly legible and resistant identification of cables, pipes, conduits, etc within a minimum space. High flexibility, fire resistance and a 3:1 shrinkage ratio to cover a wide range of cable diameters enable suitability for many industrial and technological applications.

Technical characteristics Other characteristics

Material Cross-linked polyolefin
Min operating temperature range -67 °F
Max operating temperature range 275 °F
Shrinkaage ratio 3:1
Min shrinkaage ratio temperature 194 °F

Media gallery other media

HEAT- SHRINKABLE TUBING  H3
HEAT- SHRINKABLE TUBING  H3
HEAT- SHRINKABLE TUBING  H3
HEAT- SHRINKABLE TUBING  H3
HEAT- SHRINKABLE TUBING  H3
HEAT- SHRINKABLE TUBING  H3
HEAT- SHRINKABLE TUBING  H3
HEAT- SHRINKABLE TUBING  H3
HEAT- SHRINKABLE TUBING  H3
HEAT- SHRINKABLE TUBING  H3

List of products

TERMO-ROLL H3

Loading...

H3-30

Minimum outside diameter 0.05 in.
Maximum outside diameter 0.11 in.
Minimum section 22 AWG
Maximum section 17 AWG
Printable on both sides yes
Loading...

H3-48

Minimum outside diameter 0.07 in.
Maximum outside diameter 0.17 in.
Minimum section 20 AWG
Maximum section 14 AWG
Loading...

H3-60

Minimum outside diameter 0.1 in.
Maximum outside diameter 0.22 in.
Minimum section 17 AWG
Maximum section 10 AWG
Loading...

H3-90

Minimum outside diameter 0.16 in.
Maximum outside diameter 0.31 in.
Minimum section 12 AWG
Maximum section 6 AWG
Loading...

H3-120

Minimum outside diameter 0.2 in.
Maximum outside diameter 0.43 in.
Minimum section 10 AWG
Maximum section 2 AWG
Loading...

H3-180

Minimum outside diameter 0.26 in.
Maximum outside diameter 0.67 in.
Minimum section 6 AWG
Maximum section 1/0
Loading...

H3-240

Minimum outside diameter 0.35 in.
Maximum outside diameter 0.91 in.
Minimum section 4 AWG
Maximum section 4/0
Loading...

H3-390

Minimum outside diameter 0.59 in.
Maximum outside diameter 1.46 in.
Minimum section 1/0
Maximum section 350 MCM
Printable on both sides yes
Loading...

notes and legal information

Cembre Via Serenissima, 9 - 25135 Brescia - ITALY
© Copyright 2019 Cembre S.p.A.

CODICE FISCALE – P.IVA: 00541390175
ISCRIZIONE AL REGISTRO DELLE IMPRESE: n. 00541390175 Brescia
CAPITALE SOCIALE: € 8.840.000 i.v.