Cembre

Points of View Categories Applications Catalogues

"BILINEAR" puller-type hole punching tool
CodeB-FL750ND

Series ND, 18V Cordless Hydraulic tool

 

B-FL750ND is the new generation of hand-held cordless tools, characterized by the “Bilinear” structure of the tool’s mechanics. Operator comfort and convenience are key factors in producing repeatedly consistent high integrity crimped joints.  Cembre ‘nd’ bilinear tools have their mechanical centre of gravity nearest to the operator’s wrist to optimise the overall ergonomics of the tool and provide a wider support for the hand. 
Thus the innovative misalignment between the pump drive mechanism and the hydraulic system both reduce the torque generated on the operator’s wrist and best distribute the stresses acting on the hand.
 
A greater punch speed and punching force result from a revitalised hydraulic system with double speed action. 
The balanced punching head pivots 180deg through a full 360deg rotation for ease of use in confined spaces.  
 
Equipped with intelligent automatic return at the end of the pressing cycle (Smart Release).
 
Equipped with Li-Ion 18 V-2Ah rechargeable high capacity batteries.
 
Fitted with a maximum pressure sensor for enhanced precision and repeatability of the maximum pressure cycle, and a pressure relief valve providing additional safety for the operator.  
 
The Electronic Pressure Sensor (EPS) guarantees the precision of the crimping operation, checking the actual value of pressure and informing the operator about possible errors.
 
The OLED display provides essential real time operating data, including:
  • generated crimping force thus verifying accordance with best practice 
  • battery charge status 
  • general operating information
  • the number of work cycles completed and remaining before recommended maintenance.
 
Weight and balance have been reconfigured to yield improvements in handling and convenience. 
 
The more rigid structure of the bi-component plastic body provides greater mechanical protection while its rubber inserts boost operator safety and comfort. 
 
Quieter operation, illumination of the working area via LED lights and a minimum of vibration enhance the tool’s practicality.
 
The integrated memory card enables the user to store data from up to 200,000 compression cycles for transfer to a computer via a USB cable. (SMARTOOL technology).
 
 
Operating features:
  • Bilinear mechanical design
  • Smart Release system to automatically retract the ram at the end of the crimping cycle
  • OLED multifunctional display with touch button
  • Electronic Pressure Sensor (EPS)
  • SMARTOOL technology for viewing and downloading operational data
  • 180° rotating head
  • Start button protected against accidental operation
  • Manual pressure release button 
  • Illumination of working area via 4 x LED lights
  • Bi-component plastic body
  • Ergonomic design for operator comfort 
  • Li-Ion 18.0 V-2Ah rechargeable high capacity battery 
  • Battery connection system with release button.

 

 

PUNCHING ACCESSORIES AVAILABLE

 

ROUND PUNCH
Hole Diameter

Material max thickness (mm)

Pilot hole

Ø

Type
Nominal Pg ISO GAS

Stainless

Steel

Mild

Steel

KIT (Punch

+ Die)

Puller
Ø (mm) Ø (inch) (mm)
15,5  .610 Pg9 - -

2,5 mm (0.1 in.)   

Rm= 700 N/mm2

3,5 mm (0.14 in.)  

  Rm= 510 N/mm2

11,5 RD15.5SS TD-11
16,2  .638 - ISO-16 -   RD16.2SS
17  .669 - - G3/8”   RD17SS
17,5  .689 - - -   RD17.5SS
18,8  .740 Pg11 - -   RD18.8SS
19,1  .752 - - -   RD19.1SS
20,5  .807 Pg 13,5 ISO-20 -   RD20.5SS
21,5  .846 - - G1/2"   RD21.5SS
22,6  .890 Pg16 - -   RD22.6SS
23,8  .937 - - G5/8”   RD23.8SS
25,4 1.000 - ISO-25 -   RD25.4SS
27 1.063 - - G3/4”   RD27SS
28,5 1.122 Pg21 - -   RD28.5SS
30,5 1.201 - - G7/8”   RD30.5SS
28,5 1.122 Pg 21 - - 20 RD28.5SS-19 TD-19
30,5 1.201 - - G7/8”   RD30.5SS-19
31,8 1.252 - - -   RD31.8SS
32,5 1.279 - ISO-32 -   RD32.5SS
34 1.338 - - G1"   RD34SS
34,6 1.362 - - -   RD34.6SS
37,2 1.464 Pg29 - -   RD37.2SS
38,1 1.500 - - -   RD38.1SS
38,5 1.515 - - G1"1/8"   RD38.5SS
40,5 1.594 - ISO-40 -   RD40.5SS
41,3 1.626 - - -   RD41.3SS
42,5 1.673 - - G1”1/4”   RD42.5SS
43,2 1.701 - - -   RD43.2SS
44,5 1.752 - - -   RD44.5SS
47,2 1.858 Pg36 - -   RD47.2SS
48,5 1.909 - - G1”1/2”   RD48.5SS
50,5 1.988 - ISO-50 -   RD50.5SS
51,4 2.023 - - -   RD51.4SS
52,4 2.063 - - -   RD52.4SS
54,2 2.134 Pg42 - G1”3/4”   RD54.2SS
60 2.362 Pg48 - G2”   RD60SS
60,5 2.381 - - -   RD60.5SS
64 2.520 - ISO-63 -   RD64SS
65 2.559 - - -   RD65SS
76 2.992 - - G2”1/2” 3   RD76SS
76,5 3.011 - - - 3,5   RD76.5SS
80,5 3.169 - - - 3   RD80.5SS
89 3.503 - - G3" 3,5   RD89SS
90 3.543 - - - 2 3   RD90SS
100 3.937 - - - 2 3 29 RD100SS TD-28.5*
102 4.015 - - - 2 3   RD102SS
114 4.488 - - - 2 2,5   RD114SS
120 4.724 - - - 1,5 2   RD120SS
140 5.512 - - - 1,5 2   RD140SS
Puller included in the kit

 

SQUARE PUNCH
Hole Diameter

Material max thickness (mm)

Pilot hole

Ø

Type
Nominal

Stainless

Steel

Mild

Steel

KIT (Punch + Die + Puller)

Ø (mm) Ø (inch) (mm)
21,0 x 21,0 .827 x .827 2,5 3,5 12 RD21X21
46,0 x 46,0 1.811 x 1.811 1,5 2 26,5 RD46X46
68,0 x 68,0 2.677 x 2.677 22,5 RD68X68
92,0 x 92,0 3.622 x 3.622 RD92X92
126,0 x 126,0 4.960 x 4.960 28,5 RD126X126
138,0 x 138,0 5.433 x 5.433 1 1,5 RD138X138
220,0 x 220,0 8.661 x 8.661 RD220X220

 

  RECTANGULAR PUNCH    
Hole Diameter Material max thickness (mm)

Pilot hole

Ø

Type
Nominal Stainless Steel Mild Steel KIT (Punch + Die + Puller)
Ø (mm) Ø (inch) (mm)
18,0 x 46,0 .709 x 1.811 2 2 16,5 RD18X46
22,0 x 30,0 .866 x 1.181 RD22X30
22,0 x 46,0 .866 x 1.811 RD22X46
35,0 x 86,0 1.377 x 3.385 RD35X86
35,0 x 112,0 1.377 x 4.409 RD35X112
36,0 x 46,0 1.417 x 1.811 23,8 RD36X46
37,0 x 54,0 1.456 x 2.125 1,5 16,5 RD37X54
37,0 x 67,0 1.456 x 2.637 RD37X67
37,0 x 88,0 1.456 x 3.464 26,5 RD37X88
37,0 x 104,0 1.456 x 4.094 RD37X104
37,0 x 115,0 1.456 x 4.527 RD37X115
46,0 x 54,0 1.811 x 2.126 RD46X54
46,0 x 72,0 1.811 x 2.835 RD46X72
46,0 x 107,0 1.811 x 4.212 RD46X107
50,0 x 98,0 1.968 x 3.858 RD50X98
67,0 x 126,0 2.637 x 4.960 28,5 RD67X126

 

"D" PUNCH
Hole Diameter Material max thickness (mm)

Pilot hole

Ø

Type
Nominal

Stainless

Steel

Mild

Steel

KIT (Punch + Die + Puller)
Ø (mm) Ø (inch) (mm)
(a)38,3 x (b)36,6 (a)1.507 x (b)1.442 2,5 3,5 18,5 RD18D
(a)43,1 x (b)41,5 (a)1.696 x (b)1.632 RD24D
Acciaio inox = Rm= 700 N/mm2 - Acciao dolce = Rm= 500 N/mm2
USE OF NON-CEMBRE PUNCHING ACCESSORIES
Type Punch & Die

Pilot Hole

Ø mm

TRD-9,4C (*) KLAUKE, GREENLEE 3/8" - 24 UNF Ø 9.7
TRD-M11C (*) IMB, BM, COSMEC (M11x1.5) Ø 11.5
TD-M16C IMB, BM, COSMEC (M16x1.5) Ø 16.5 o RD17.5SS 
TD27 COSMEC (Ø105÷Ø140) Ø 27.5
TD14X14-M14 COSMEC 46x46 Ø 18.8
TD120X20-M20 COSMEC 92x92 Ø 27.5
TD20X20-M20 BM, COSMEC 42x95 Ø 27.5
TGD-13.5X13.5-M13 COSMEC 40x40; 45x45; 46x46 Ø 18.8
TGD-10X10-M9 COSMEC 006505 Ø 13.8
(*)  the washer supplied with the KIT must be threaded onto the draw stud and positioned between the head and the die to allow the die to rest correctly

Media gallery other media

application 01
application 02

List of products

B-FL750ND

Loading...

notes and legal information

Cembre Via Serenissima, 9 - 25135 Brescia - ITALY
© Copyright 2018 Cembre S.p.A.

CODICE FISCALE – P.IVA: 00541390175
ISCRIZIONE AL REGISTRO DELLE IMPRESE: n. 00541390175 Brescia
CAPITALE SOCIALE: € 8.840.000 i.v.