Cembre

Points of View Categories Applications Catalogues

HEAT- SHRINKABLE TUBING
CodeTERMO-ROLL H2

on reel, pre-cut

H2 type heat-shrinkable tubing is used to provide highly legible and resistant identification of cables, pipes, conduits, etc within a minimum space. Halogen free composition provides flame retardancy and low smoke emission characteristics suitable for safety critical applications including closed environments such as tunnels and subways, rail installations, marine and industrial applications.

Certificates

EN 45545-2:2013 N°010.1IS0040/15

Technical characteristics Other characteristics

Material Cross-linked polyolefin
Halogen Free yes
Shrinkaage ratio 2:1
Min shrinkaage ratio temperature 90 °C
Min operating temperature range -40 °C
Max operating temperature range 105 °C

Media gallery other media

application 01
application 02
application 03
application 04
application 05
application 06
application 07
application 08
Spare parts list 09
Spare parts list 10

List of products

TERMO-ROLL H2

Loading...

H2-24

Minimum outside diameter 1.6 mm
Maximum outside diameter 2 mm
Minimum section 0.25 mm2
Maximum section 0.5 mm2
Loading...

H2-32

Minimum outside diameter 1.8 mm
Maximum outside diameter 2.8 mm
Minimum section 0.5 mm2
Maximum section 1 mm2
Loading...

H2-48

Minimum outside diameter 2.8 mm
Maximum outside diameter 4.2 mm
Minimum section 1 mm2
Maximum section 2.5 mm2
Loading...

H2-64

Minimum outside diameter 4.2 mm
Maximum outside diameter 5.8 mm
Minimum section 4 mm2
Maximum section 6 mm2
Loading...

H2-95

Minimum outside diameter 5.8 mm
Maximum outside diameter 8 mm
Minimum section 10 mm2
Maximum section 16 mm2
Loading...

H2-127

Minimum outside diameter 8 mm
Maximum outside diameter 11 mm
Minimum section 25 mm2
Maximum section 35 mm2
Loading...

H2-190

Minimum outside diameter 11 mm
Maximum outside diameter 17 mm
Minimum section 35 mm2
Maximum section 50 mm2
Loading...

H2-254

Minimum outside diameter 17 mm
Maximum outside diameter 23 mm
Minimum section 50 mm2
Maximum section 120 mm2
Loading...

H2-381

Minimum outside diameter 23 mm
Maximum outside diameter 36 mm
Minimum section 120 mm2
Maximum section 240 mm2
Printable on both sides yes
Loading...

H2-508

Minimum outside diameter 23 mm
Maximum outside diameter 48 mm
Minimum section 240 mm2
Maximum section 400 mm2
Loading...

notes and legal information

Cembre Via Serenissima, 9 - 25135 Brescia - ITALY
© Copyright 2018 Cembre S.p.A.

CODICE FISCALE – P.IVA: 00541390175
ISCRIZIONE AL REGISTRO DELLE IMPRESE: n. 00541390175 Brescia
CAPITALE SOCIALE: € 8.840.000 i.v.