Cembre

Points of View Categories Applications Catalogues

WRAPAROUND CABLE MARKERS
CodeMG-KMP

self adhesive, precut

MG-KMP wraparound cable markers are suitable for identifying large diameter cables, tubes and conduit. MARKINGenius® printing is exceptionally clear and legible and is protected from chemical and atmospheric agents.

Certificates

2011/65/EU 2011/65/EU

Laboratory Test

CEI EN 60464-2

i RESISTANCE TO SOLVENT VAPOUR

Resistance to solvent vapour is verified by the condition of the test sample following exposure

The standard requires the sample to be placed in a container of the specified solvent.

The test samples must be suspended vertically with the lower edge around 150 mm above the surface of the test solvent. During the exposure, the liquid must not evaporate completely and, if necessary, must be topped up.

The temperature of the test solvent must be 23 ± 2 °C and the duration of exposure must be 168h ± 1 (seven days).

After removal from the container, each test sample must be examined to determine whether there has been any change in appearance, loss of adherence of the sub layer, exfoliation, detachment, bulging or other signs of deterioration.

The solvents used by Cembre for this test are: Acetone, Ethanol, Hexane

Technical characteristics Other characteristics

Material PVC film
Silicon free yes
Precut yes
Adhesive yes
Geometric shape rectangular with square corners
Min operating temperature range -30 °C
Max operating temperature range 70 °C
Min application temperature 10 °C
Max application temperature 40 °C

Media gallery other media

WRAPAROUND CABLE MARKERS MG-KMP
WRAPAROUND CABLE MARKERS MG-KMP
WRAPAROUND CABLE MARKERS MG-KMP
WRAPAROUND CABLE MARKERS MG-KMP
WRAPAROUND CABLE MARKERS MG-KMP
WRAPAROUND CABLE MARKERS MG-KMP
WRAPAROUND CABLE MARKERS MG-KMP

List of products

MG-KMP038

Minimum outside diameter 4.3 mm
Maximum outside diameter 7 mm
Loading...

MG-KMP050

Minimum outside diameter 6 mm
Maximum outside diameter 10 mm
Loading...

MG-KMP075

Minimum outside diameter 8 mm
Maximum outside diameter 14 mm
Loading...

MG-KMP100

Minimum outside diameter 12 mm
Maximum outside diameter 20 mm
Loading...

MG-KMP135

Minimum outside diameter 20 mm
Maximum outside diameter 25 mm
Loading...

notes and legal information

Cembre Via Serenissima, 9 - 25135 Brescia - ITALY
© Copyright 2018 Cembre S.p.A.

CODICE FISCALE – P.IVA: 00541390175
ISCRIZIONE AL REGISTRO DELLE IMPRESE: n. 00541390175 Brescia
CAPITALE SOCIALE: € 8.840.000 i.v.