The tool features a double
speed action: a fast
advancing speed for rapid
approach of the dies to the
connector and a slower more
powerful speed for crimping.
The crimping head can rotate
through 180° for ease of operation.
Max cutting ø 55 mm
The tool is supplied with:
• Basic tool with battery, wrist
strap and shoulder strap
• Spare battery
• Battery charger
• Plastic carrying case
suitable for storing
the
tool and accessories
Specifically designed to cut
copper, aluminium and telecommunication
cables.
The tool features a double speed
action: a fast advancing speed for
rapid approach of the blades to the
cable and a slower more powerful
speed for cutting.
The blades are manufactured from
high strength special steel, heat
treated to ensure a long service life.
The head can be easily opened to allow
the cutting of running cables.
The head can rotate through 335
degrees, to enable the operator to
work in the most comfortable position.
Fitted with a maximum hydraulic
pressure valve.
Complete with a
battery condition display, which
after every operation indicates the
residual battery power.
Extremely quiet in operation, with
very little vibration. Ergonomically
designed with a sculptured body
for operator comfort.
Max cutting ø 55 mm
The tool is supplied with: • Basic tool with battery
and shoulder strap
• Spare battery
• Battery charger
• Metal carrying case suitable for
storing the tool and
accessories.
Hand operated
hydraulic tool
specifically designed to
cut copper, aldrey, aluminium,
aluminium-steel cables and
steel ropes, aluminium and steel
rods having a max overall diameter
of 55 mm.
The HT-TC055 is provided with a
two stage hydraulic system, which
advances the blades quickly to the
cable. This proven system saves
operator time and effort.
The HT-TC055 is provided with an
automatic safety valve to bypass oil
when reaching max pressure.
This means safety to the operator
and protection to the blades.
The blades are manufactured from
high strength special steel, heat
treated to ensure a long service life.
The shape of the blades provides a “clean” cut.
The head can be opened to allow
cutting of running cables and ropes.
The head rotates 330 degrees allowing
the operator to perform the
cut in the most comfortable position.
The tool is supplied complete with
plastic case VAL P7 for protection
and storage when not in use.
Max cutting ø 55mm.
TC 055 hydraulic cutting head
Hydraulic cutting head complete
with quick automatic coupler for
connection to a hydraulic pump with
a working pressure of 700 bar max. TC055 has the same cutting capability
as HT-TC055.
Includes the MPC7 device, complete
with test die set, to measure
the maximum force developed by
Cembre tools: HT45, HT 51, RH 50, RHM 50,
HT 61, RH 61, B15D (use adaptor
available separately), B35-45D,
B35-50D, B 46, B 51, B 54D, B55,
B 62.
Now available in LN versions
HT 131LN-C
RHC 131LN
B 131LN-C
B 135LN-C
LN versions feature a large 42 mm
jaw opening for an easier introduction/
removal of large size
compression terminations
and joints.
CPE-1 electrically driven hydraulic pump
Electrically driven hydraulic pump,
powered by a 220V - 50Hz single-phase
electrical motor.
110V - 50Hz CPE-1-110 version available.
The remote hand controller allows
advancement and pressure release on
completion of the crimping operation.
The mechanically actuated emergency
button located on the pump body, allows
the pressure release at any time also in
case of power shortage.
IP55 rated.
Operating pressure: 700bar.
Supplied with: - high pressure fl exible hose with female automatic
quick coupler
- remote hand controller
- external supply connection cable.