Identification and Labelling Products
MG-TDM Cable tags: one piece, push on, without holder
MG-TDM one piece tags require no transparent holders and are mounted on cables via the two range-taking
apertures.
Each sheet of media has 66 tags and takes around 10 seconds to print.
Tags are easily removed from the stems and partially printed sheets may be re-used to avoid wastage.
Printable on MARKINGenius MG and MG2 with appropriate templates, available as accessories.
Material: Poycarbonate, Halogen free, self extinguishing according to class V0 (UL94), high mechanical strength and excellent dimensional stability.
Use: Directly on cables according to the diameter ranges shown in the table. No transparent holders required.
MG-TDM-01 Cable ext.Ø range 1,6 ÷ 3,25mm and c.s.a range 0,5 ÷ 1,5*mm² |
||||||
 |
Colour | Size mm | Code | Tags per sheet | Quantity | SW Code |
| white | 4x12 | 40190 | 66 | 1.320 | 121 | |
| yellow | 4x12 | 40140 | 66 | 1.320 | 121 | |
MG-TDM-02 Cable ext.Ø range 2 ÷ 4,4mm and c.s.a range 1 ÷ 6*mm² |
||||||
 |
white | 4x12 | 40290 | 66 | 1.188 | 122 |
| yellow | 4x12 | 40240 | 66 | 1.188 | 122 | |
Thermal Transfer system for sheet media printing
Markingenius®MG2
Markingenius®MG2 has been exclusively designed by Cembre for the identification of conductors and electrical components.
Markingenius®MG2 is a high resolution printer based on thermal transfer technology, capable of producing markers for cables and terminal blocks, legends for pushbuttons and all electrical panel components. All Cembre MG media can be printed with Windows True Type fonts in black or colour at high speed.
Markingenius®MG2 will also reproduce Clipart images, drawings, barcodes and bitmaps down to very small sizes.
Compact, ergonomic, clean and quiet, Markingenius®MG2 may be conveniently located in an office, like any other peripheral.
Each monochrome ribbon can print more than 150.000 MG-TPMF 4x10 mm cable tags with full printable surface coverage. Carriage loading and unloading operations are rapid; support templates are easily interchanged and as the pigment deposited from the ribbon dries instantaneously, printed sheets are immediately ready to use.
Download PDF file for technical features
Thermal Transfer system for reel media printing
Rolly 1000
The Rolly 1000 marking system from Cembre is designed for the volume printing of cable markers and adhesive labels.
FEATURES:
- SPEED Prints 1.000 tags type TPM-ROLL tags in less than two minutes
- ECONOMY Prints about 130.000 tags with a single ribbon
- CONVENIENCE GeniusROLLY software provides quick and easy upload of data to be printed
- QUALITY Printer resolution 300dpi
Download PDF file for technical features
