Genius =================================================================================================================================== DATE VERSION NOTE =================================================================================================================================== 24/04/2012 11.2 ( Build 11.2.0.8 ) - Added SW code 824 (MG2-VRT 25x140) - Added SW code 835 (MG2-VRTH 35x142) - Added SW code 836 (MG2-VRTH 82x142) =================================================================================================================================== 18/04/2012 11.2 ( Build 11.2.0.7 ) - Added SW code 208 (MG2-VRTH 102x138) =================================================================================================================================== 12/04/2012 11.2 ( Build 11.2.0.6 ) - Added SW code 823 (MG-VRTH 35x85) =================================================================================================================================== 22/03/2012 11.2 ( Build 11.2.0.5 ) - Added SW code 4810 (THERMO-ROLL M2-H2-M3 3,2x12,5) - Added SW code 4820 (THERMO-ROLL M2-H2-M3 4,8x12,5) - Added SW code 4830 (THERMO-ROLL M2-H2-M3 6,4x12,5) - Added SW code 4840 (THERMO-ROLL M2-H2-M3 9,5x12,5) =================================================================================================================================== 05/03/2012 11.2 ( Build 11.2.0.4 ) - Added SW code 831 (MG-VRTH 15x52) - Added SW code 832 (MG-VRTH 25x80) - Added SW code 833 (MG-VRTH 35x50) - Added SW code 834 (MG2-VRTH 29x140) - Added SW code 5010 (STRIP-ROLL 35x430 - TTF) - Added SW code 5110 (STRIP-ROLL 35x650 - TTF) - Added SW code 5210 (STRIP-ROLL 35x1000 - TTF) =================================================================================================================================== 30/01/2012 11.2 ( Build 11.2.0.3 ) - Added SW code 719 (MG-TAR 8x55) - Added model 2 of SW code 505 (MG-TMPF 4x12) =================================================================================================================================== 20/12/2011 11.2 ( Build 11.2.0.2 ) - Added SW code 4892 (THERMO-ROLL M2-H2-M3 50,8x25) - Added SW code 4894 (THERMO-ROLL M2-H2-M3 50,8x50) =================================================================================================================================== 05/12/2011 11.2 ( Build 11.2.0.1 ) - Possibility to specify delimitation character in Data reverse function - Added SW code 345 (MG-17.5 37,5x17,5) - Reduced minimum length of continuos heat shrinkable tubing to 5mm - Fixed errors on holder and stem numbering for TPM-ROLL & MG-TPMF =================================================================================================================================== 05/09/2011 11.1 ( Build 11.1.0.1 ) - Added Portuguese language in "System default settings" - Added SW code 350 (MG-TAR 10x28) =================================================================================================================================== 25/07/2011 11.0 ( Build 11.0.0.17 ) - Added SW code 250 (MG-SIGNS C 40) - Added SW code 275 (MG2-SIGNS 45x150) =================================================================================================================================== 04/07/2011 11.0 ( Build 11.0.0.16 ) - Added SW code 506 (MG-TPMF 4x18) - Added SW code 4020 (TPM-ROLL 4x10 NEW) =================================================================================================================================== 20/06/2011 11.0 ( Build 11.0.0.15 ) - Added SW code 874 (MG-DOG 20 mm H 6,5) - Added SW code 718 (MG-TAR 14x45) - Fixed SW code 273 (MG-SIGNS 110x140) =================================================================================================================================== 31/05/2011 11.0 ( Build 11.0.0.14 ) - Added SW code 307 (MG-KMP 50x12) =================================================================================================================================== 24/05/2011 11.0 ( Build 11.0.0.13 ) - Added SW code 4022 (TPM-ROLL 4x12 NEW) =================================================================================================================================== 24/05/2011 11.0 ( Build 11.0.0.12 ) - Added SW code 111 (MG-CPM-12 4,2x6) - Added SW code 4852 (THERMO-ROLL M2-H2-M3 12,7x25) - Added SW code 4854 (THERMO-ROLL M2-H2-M3 12,7x50) - Added SW code 4862 (THERMO-ROLL M2-H2-M3 19x25) - Added SW code 4864 (THERMO-ROLL M2-H2-M3 19x50) - Added SW code 4872 (THERMO-ROLL M2-H2-M3 25,4x25) - Added SW code 4874 (THERMO-ROLL M2-H2-M3 25,4x50) - Added SW code 4882 (THERMO-ROLL M2-H2-M3 38,1x25) - Added SW code 4884 (THERMO-ROLL M2-H2-M3 38,1x50) =================================================================================================================================== 17/05/2011 11.0 ( Build 11.0.0.11 ) - Possibility to select not TrueType font in designer - Added SW code 260 (MG-SIGNS T 50 + 15x50) - Added SW code 7010 (THERMO-ROLL-CONT 3,2) - Added SW code 7020 (THERMO-ROLL-CONT 4,8) - Added SW code 7030 (THERMO-ROLL-CONT 6,4) - Added SW code 7040 (THERMO-ROLL-CONT 9,5) - Added SW code 7050 (THERMO-ROLL-CONT 12,7) - Added SW code 7060 (THERMO-ROLL-CONT 19) - Added SW code 7070 (THERMO-ROLL-CONT 25,4) - Added SW code 7080 (THERMO-ROLL-CONT 38,1) - Added SW code 7090 (THERMO-ROLL-CONT 50,8) =================================================================================================================================== 19/04/2011 11.0 ( Build 11.0.0.10 ) - Fixed error in FNR import - Fixed error on barcode =================================================================================================================================== 23/03/2011 11.0 ( Build 11.0.0.9 ) - Added counter increment to Excel export - Added SW code 113 (MG-CPM-13 5x12) - Added SW code 114 (MG-CPM-13 6x12) - Fixed SW code 312 (MG-KMP 135x50) - Fixed error on barcode =================================================================================================================================== 18/03/2011 11.0 ( Build 11.0.0.8 ) - Added SW code 1003 (MG2-PTS 62x60) - Added SW code 4812 (THERMO-ROLL M2-H2-M3 3,2x25) - Added SW code 4814 (THERMO-ROLL M2-H2-M3 3,2x50) - Added SW code 4824 (THERMO-ROLL M2-H2-M3 4,8x50) - Added SW code 4834 (THERMO-ROLL M2-H2-M3 6,4x50) - Added SW code 4842 (THERMO-ROLL M2-H2-M3 9,5x25) - Added SW code 4844 (THERMO-ROLL M2-H2-M3 9,5x50) - Fixed error in ACS import - Fixed error in FNR import - Added sub-chapters to English manual =================================================================================================================================== 04/03/2011 11.0 ( Build 11.0.0.7 ) - Added SW code 822 (MG2-VRT 40x138) - Fixed errors in Excel/CSV import - Fixed error in counters with increment =================================================================================================================================== 21/02/2011 11.0 ( Build 11.0.0.6 ) - New English manual in CHM format =================================================================================================================================== 09/02/2011 11.0 ( Build 11.0.0.5 ) - Added SW code 548 (MG-CPMF 4,6x118) - ACS import: ground symbol detected (printable with Plot font) - Fixed error on stem numbering on MG-TDM and MG-TDMO =================================================================================================================================== 20/01/2011 11.0 ( Build 11.0.0.4 ) - Added decimal symbol in "System default settings" - Added SW code 870 (MG-DOG 20 mm circular) - New text in designer takes font from "System default settings" - Fixed error on alignments =================================================================================================================================== 17/12/2010 11.0 ( Build 11.0.0.3 ) - Max length for unicode text increased to 254 characters - Fixed problem of cut job details on MG-CPM SW codes - Fixed some translations =================================================================================================================================== 13/12/2010 11.0 ( Build 11.0.0.2 ) - Added SW code 873 (MG-DOG 21x39) - Added SW code 7000 (THERMO-ROLL-CONT 2,4) =================================================================================================================================== 03/12/2010 11.0 ( Build 11.0.0.1 ) ========= DATA MODE ========= - Possibility to resize, rotate and align images like text - New function to paste unicode text from clipboard (support to all different alphabets) - New colours in data grid: violet = unicode text pink = unicode text / stretching enabled orange = image - New window merging characters map and symbols library, to easier insert symbols and customise library - Modular strips: possibility to define component size either in millimeters and number of modules - Added option "Print group" in "Print set up" to print group also without the stem division function - New IDH import (data exchange with some electrical cads) - Customisable import path in "System default settings" - New "System default settings" window, organized in logical tabs - Simplified users manager - Resizable data grid panel and media list panel with mouse drag - Customisable data grid font and media list font - Automatic column resize with table resize (data grid) - New upgrade bar, signaling if an upgrade is available, with link to the download page - New "About" window, with link to remote connection facility - Possibility to directly open a job from Windows throw "FGI" (for data mode) and "MGT" (for designer) files - Automatically set 90° text on description tags of media 884/886/887/888/889/890/891 (MG-PLC) - New model 2 of media 887/888/891 (MG-PLC 25x50) to skip printing of description tags - Added SW codes 921/922/923/924/925/928/929/931/934/935/936/937/938 for MG-17.5-A - Possibility to work with Genius and Advance Label simultaneously - Fixed red line error when inserting new data and moving on another column with mouse - Fixed some errors on data insert / edit / browse - Fixed some minor bugs ======== DESIGNER ======== - Text type selection (horizontal, vertical or circular) - Added vertical text - Added circular text - Added multiline text - Added stretched text - Added triangle in geometric shapes - Added DB images (image path from database, not fixed) - View rotation --> possibility to work either in landscape and portrait mode - Improved text resize with mouse drag - Added jpeg compression tool wich works with all raster images (jpg, bmp, png) - New function menu with right click on database (Insert/Cut/Copy/Paste/Duplicate/Delete/Select all) - Multi-selection of data with Shift key + mouse click in the database - Fixed problem of black images during print process - Fixed problem of text cut on right side for italic font - Fixed problem of text cut during zoom operations - Fixed problems with guidelines - Fixed problem of wrong orientation in print preview with Rolly media - Fixed some minor bugs =================================================================================================================================== 22/11/2010 10.7 ( Build 10.7.0.17 ) - Added SW code 820 (MG-VRT 30x70) - Added SW code 821 (MG-VRT 60x100) =================================================================================================================================== 18/11/2010 10.7 ( Build 10.7.0.16 ) - Added SW code 4822 (THERMO-ROLL 4,8x25) - Added SW code 4832 (THERMO-ROLL 6,4x25) =================================================================================================================================== 29/10/2010 10.7 ( Build 10.7.0.15 ) - Added SW code 184 (MG-VCT 11x38) - Added SW code 4023 (TPM-ROLL 4x15 NEW) - Added SW codes 128/129/130 (MG-TDMO 4x16) - Added SW codes 912/913/914/915 (MG-TPMF copy) =================================================================================================================================== 27/09/2010 10.7 ( Build 10.7.0.14 ) - Added SW codes 123 and 124 (MG-TDM 4x16) =================================================================================================================================== 08/09/2010 10.7 ( Build 10.7.0.13 ) - Reduced print area on sw-codes 711/712/713/714/716/717/178 =================================================================================================================================== 30/07/2010 10.7 ( Build 10.7.0.12 ) - Fixed error: default sw-code not selected at startup =================================================================================================================================== 14/07/2010 10.7 ( Build 10.7.0.11 ) - Genius version + date in "About" - Fixed error in counters - Fixed pitch on SW code 92 - Fixed some translations =================================================================================================================================== 06/07/2010 10.7 ( Build 10.7.0.10 ) - File MTX import: Line break character recognized - Added SW code 901 (MG-TPM 4x10 - flip flop) - Added SW code 902 (MG-TPM 4x12 - flip flop) - Group data length increased to 255 characters - Holder data length increased to 4 characters =================================================================================================================================== 29/06/2010 10.7 ( Build 10.7.0.9 ) - Added group in "Counter set up" - Added option "Copy previous first data" in "System default settings" - Fixed error in "Fast insert" =================================================================================================================================== 22/06/2010 10.7 ( Build 10.7.0.8 ) - Fixed CFG loading error on MG-TDM =================================================================================================================================== 18/06/2010 10.7 ( Build 10.7.0.7 ) - Added SW code 125 (MG-TDMO-01 4x12) - Added SW code 126 (MG-TDMO-02 4x12) - Added SW code 127 (MG-TDMO-03 4x12) - Added SW codes 991 and 992 (MG-TDM 4x12 - Holder) - Added option "Copy previous group" in "System default settings" - Added option "Copy previous holder" in "System default settings" - Fixed error of wrong rotation on MG-CPMF - Fixed error in copy/paste operation in designer database - Fixed some minor bugs =================================================================================================================================== 11/05/2010 10.7 ( Build 10.7.0.6 ) - Fixed margins on STRIP-ROLL =================================================================================================================================== 05/05/2010 10.7 ( Build 10.7.0.5 ) - Disabled possibility to delete SW codes with Ctrl+Delete shortcut - Added arrows in symbols library - Added SW code 903 (MG-TPM 4x15 - flip flop) - Fixed some translations =================================================================================================================================== 23/04/2010 10.7 ( Build 10.7.0.4 ) - Added SW code 45 (MG-CPM-04 6x10) - Added SW code 92 (MG-CPM-09 4,4x10) - Added SW code 5002 (STRIP-ROLL 15x430 - 4 strips) - Added SW code 5102 (STRIP-ROLL 15x650 - 4 strips) - Added SW code 5202 (STRIP-ROLL 15x1000 - 4 strips) - Added SW code 6166 (STRIP-ROLL 15x27) =================================================================================================================================== 07/04/2010 10.7 ( Build 10.7.0.3 ) - Fixed problem with zoom on barcode =================================================================================================================================== 31/03/2010 10.7 ( Build 10.7.0.2 ) - Added SW code 890 (MG-PLC Siemens) - Added SW code 891 (MG-PLC Siemens) - Added SW code 892 (MG-PLC Siemens) =================================================================================================================================== 08/03/2010 10.7 ( Build 10.7.0.1 ) - Export to Excel function - Counters R1-T3 and U1-W3: automatically created in the correct order - Special function "IMG" to print background image on media in data mode - Added SW code 2 (MG-TPM 4x12) - Added SW codes 4700..4711 (KM-ROLL - Whole Area) to print the whole label - Fixed problem on data sorting function in "Print set up" - Fixed problem on stem division by group - Keep selected datum during Style profile/Save/Select all/Deselect all operations =================================================================================================================================== 18/02/2010 10.6 ( Build 10.6.0.1 ) - Fixed ACS file import - Fixed error in copy/paste operation from a text file - Added SW code 251 (MG-SIGNS-VY circular ø 25 mm) - Added SW codes 362/363/364/376/378 for MG-TAPW - Added SW codes 960/961/962/963/964/965/966/967/968/976/978 for MG-TAA - Added SW code 136 (ABB RC510TT 5x10) - Added SW code 137 (ABB RC610TT 6x10) - Added SW code 138 (ABB RC810TT 8x10) - Added SW codes 5200 and 5201 (STRIP-ROLL 1000 mm) for Rolly 2000 - Added SW code 4149 (TTL 12x40) - Added SW code 4153 (TTL 12,7x50) - Added SW code 4155 (TTL 15x20) - Added SW code 4156 (TTL 15x34) - Added SW code 4157 (TTL 15x78) - Added SW code 4159 (TTL 18x47) - Added SW code 4162 (TTL 21x70) - Added SW code 4168 (TTL 25x45) - Added SW code 4170 (TTL 25x80) - Added SW code 4175 (TTL 30x50) - Added SW code 4176 (TTL 30x80) - Added SW code 4177 (TTL 30x100) - Added SW code 4186 (TTL 37x74) - Added SW code 4188 (TTL 40x80) - Added SW code 4192 (TTL 50x80) - Added SW code 4202 (TTL 30x30) - Added SW code 4203 (TTL 40x40) - Added SW code 4204 (TTL 70x70) - Added SW code 4205 (TTL 100x100) - Added SW code 4220 (TTL C 16) - Added SW code 4222 (TTL C 25) - Added SW code 4224 (TTL C 50) - Added model 2 of SW code 4601 (KM-ROLL 25x23) - Added model 2 of SW code 4611 (KM-ROLL 135x23) =================================================================================================================================== 26/01/2010 10.5 ( Build 10.5.0.6 ) - Size of preview window is saved - Fixed SW code 867 (MG-DOG 20x20) =================================================================================================================================== 23/12/2009 10.5 ( Build 10.5.0.5 ) - Added SW code 889 (MG-PLC Siemens) =================================================================================================================================== 21/12/2009 10.5 ( Build 10.5.0.4 ) - Added SW code 334 (MG-17,5 25x27) =================================================================================================================================== 14/12/2009 10.5 ( Build 10.5.0.3 ) - Added File FNR "Custom" Import - Added option "Save last settings used" in "Style profile" =================================================================================================================================== 04/12/2009 10.5 ( Build 10.5.0.2 ) - Added "Increment" field for counters in Excel import - Possibility to set/change the increment in universal counter - Possibility to change from a counter to a single datum entry - Added option "Print job in reverse order" in "Print set up" - Added SW codes 5100 and 5101 (STRIP-ROLL 650 mm / 36 modules) for Rolly 2000 - Added SW code 981 (MG-ETF 13x57 red and blue models) - Multi-selection of data with Shift key + mouse click - Possibility to use Tab key to navigate in Designer database - Fixed print area of MG-KMP media - Instant preview of last data entry during new data insert - Fixed error of printer settings defaulting back to "printer A" from previous upgrade - Fixed some minor bugs =================================================================================================================================== 10/11/2009 10.5 ( Build 10.5.0.1 ) - Added SW code default repetition in "Compile favourites" - Possibility to save and load all SW code settings in "Compile favourites" - Added option to enable print media in Designer in "System default settings" - Added option to manuallly set the print area of MG & Rolly printers - Designed new grids for all MG-PLC SW codes - Fixed some TTL models - Corrected Czech language in "System default settings" =================================================================================================================================== 16/10/2009 10.4 ( Build 10.4.0.1 ) - Fixed error in stem numbering during print preview - Fixed error in CSV import in designer - Added SW code 131 (ABB MC512 5x12) - Added SW code 132 (ABB MC612 6x12) - Added SW code 133 (ABB MC812 8x12) - Added SW code 887 (MG-PLC Siemens) - Added SW code 888 (MG-PLC Siemens) - Designed new grids for all MG-PLC SW codes - Added SW code 4129 (TTL 6,3x19) - Added SW code 4146 (TTL 10x32) - Fixed some TTL models - Added Czech language in "System default settings" =================================================================================================================================== 29/09/2009 10.3 ( Build 10.3.0.1 ) - Added medium N° 870 (MG-DOG 35 mm circular) - Added medium N° 335 (MG-17,5 25x18) - Added medium N° 336 (MG-17,5 25x36) - Added medium N° 337 (MG-17,5 25x50) - Added medium N° 338 (MG-17,5 25x70) - Changed import procedure of FNR file of IGE-XAO - Counters data length increased to 255 characters - Added button "Add image" in toolbar - Online manual starts with the same language of software - Fixed rounding errors of pitch in millimeters on MG-CPMF - Fixed some minor bugs =================================================================================================================================== 22/07/2009 10.2 ( Build 10.2.0.9 ) - Added medium N° 360 (MG-TAA-TAPW 9x12 - New model) - Added medium N° 361 (MG-TAA-TAPW 9x15 - New model) =================================================================================================================================== 16/07/2009 10.2 ( Build 10.2.0.8 ) - Added medium N° 868 (MG-DOG 25x50) - Added medium N° 869 (MG-DOG 19x38) =================================================================================================================================== 18/06/2009 10.2 ( Build 10.2.0.7 ) - Better auto-recognizing of MG2 print area - Adjusted borders on medium 261 (MG-SIGNS triangular 50 mm) - Fixed error in database text in designer with Rolly media - Text switching function 12/AB --> AB/12 --> Possibility to choose delimitation characters - Excel import --> Shown last used sheet if opened the last file =================================================================================================================================== 08/06/2009 10.2 ( Build 10.2.0.6 ) - New DataMatrix 2D barcode in designer - Left and right alignment in stretched multi-line text - Saving the option to print the date in "Job details" window - Added media N° 4112 (TTL 12x25) - Added media N° 4125 (TTL 5x12,7) - Added media N° 4172 (TTL 25,7x50) - Added media N° 4195 (TTL 60x80) - Added media N° 4200 (TTL 16x16) - Added media N° 5001 (STRIP-ROLL 17,5) to print central strip - Added media N° 352 (MG-TAP 15x32) - Added media N° 353 (MG-TAP 15x43) - Added media N° 872 (MG-VRTH 50x140) - Added media N° 1040 (MG-VRTH 50x90) - Added media N° 1045 (MG-VRTH 74x74) - Data pasted from clipboard take font and style set in "Compile favourites" - Print area option (for MG2) in "Offset" window - Fixed pitch between tags on sw-code 530 (MG-CPMF 10x105) - Fixed some translations - Fixed some minor bugs =================================================================================================================================== 20/03/2009 10.2 ( Build 10.2.0.5 ) - Possibility to set a default medium in "Compile favourites" - Possibility to change the language in "System default settings" - Improved auto-fix errors function in "Style profile" =================================================================================================================================== 13/03/2009 10.2 ( Build 10.2.0.4 ) - New model 2 of media 4600 (KM-ROLL 25x15) - Added visualization of customised media description in title bar of print preview - Fixed some minor bugs =================================================================================================================================== 10/03/2009 10.2 ( Build 10.2.0.3 ) - Added media N° 183 (MG-VYT 15x15) - Added media N° 1050 (MG-VRTH 31x91 4 holes) - Fixed media N° 555 (MG-VYB 4x105) - Fixed problem of slow data imports - Main window is shown when all data are loaded - Improved text switching function (eg. 12-34/56 --> 56-34/12) - Fixed error in inverted text with 180° rotation - Fixed some bugs in auto-sizing procedure - Fixed some minor bugs =================================================================================================================================== 20/02/2009 10.2 ( Build 10.2.0.2 ) - Added media N° 4400 (ETF-ROLL 13x57) - Added media N° 4194 (TTL 52x105) - Added media N° 4197 (TTL 60x100) - Fixed some bugs in auto-sizing procedure - Fixed some minor bugs =================================================================================================================================== 06/02/2009 10.2 ( Build 10.2.0.1 ) - New procedure for auto-sizing of text --> text is auto-stretched when needed - Fixed some bugs in text rotation - Possibility to enable/disable all selected data - Visualization of text style during insertion of new data - New colours in data grid: white = single datum yellow = single datum / stretching enabled light blue = counter green = counter / stretching enabled gray = datum disabled (will not be printed) red = error during insertion - Compile favourite --> rows in alternate colours for better identification - Compile favourite --> red colour for model 2 of media - Added visualization of borders on media 261/262 (MG-SIGNS triangular labels) - Added diagonal lines in designer's geometrics - Added media N° 13 (MG-CPM-01 5x7) - Added media N° 71 (MG-CPM-07 5x10) - Added media N° 112 (MG-CPM-12 5x9) - Added media N° 4199 (TTL 75x105) - Online manual --> links to previous and next chapters - Fixed bug in stems division - Fixed bug in designer's zoom - Fixed bug in lock/unlock of objects in designer - Fixed bug in barcode linked to database in designer - Fixed some minor bugs =================================================================================================================================== 18/11/2008 10.1 ( Build 10.1.1.2 ) - Possibility to copy/paste data in different jobs - Fixed Matrix import with multiple media - Excel/CSV import: skipped characters ' and " - Added media 886 (MG-PLC) - New model 2 of media 884 e 886 (MG-PLC) to skip printing of description tags - Added missing media for MG-VRT-RH (with holes) with reduced printing area - Added visualization of holes on MG-VRT-RH / MG-PTS / MG-ETF / MG-DOG-TAG - Fixed some bugs =================================================================================================================================== 05/11/2008 10.1 ( Build 10.1.1.1 ) - Excel/CSV import: new procedure / window - Excel/CSV import: visualization of multiple sheets in Excel file - Excel/CSV import: data fields completely editable - Excel/CSV import: Save / Open of import templates - Compile favourites: new window for complete customisation of media - Compile favourites: Save / Open of media customisation templates - Added media N° 121 and 122 for MG-TDM - Print timer doesn't start during preview browsing until pressing of play button - Print timer closes when closing print preview or print job ends - Fixed function of stems division by groups and sets - Print preview in designer printable on default document printer - Fixed some bugs =================================================================================================================================== 21/10/2008 10.1 ( Build 10.1.0.2 ) - Added French online manual - Added Spanish online manual =================================================================================================================================== 15/10/2008 10.1 ( Build 10.1.0.1 ) - New import procedure: possibility to check all sw-codes and skip an unwanted sw-code - New import procedure: possibility to skip blank records - New import procedure: imported media take font style set in "Compile favourites" - Possibility to explode bill of materials by groups - New report in "Selective print" to print the list of all media - Changes in job report and bill of materials report - Software upgrade doesn't enable new media or overwrite old media models - Added media N° 4165 (TTL 22x110) - Added media N° 4154 (TTL 12,5x104) - Added media N° 818 (MG-VRT-H 35x100) - Added media N° 351 (MG-TAR 10,4x21) - New model 2 of media 508 and 509 (MG-TMPF) to skip printing of lateral tags - New model 2 of media 880 and 881 (MG-PLC) to skip printing of central tag - New model 2 of media 4607 (KM-ROLL 75x23) - Added visualization of holes on media 206/818 - Fixed some bugs - Fixed some translations - Added German online manual =================================================================================================================================== 10/09/2008 10.0 ( Build 10.0.4.5 ) - Added all 6 job details on MG-TPMF media - Added media N° 4164 (TTL 22x40) - Enabled F5 and F6 shortcuts in designer - Fixed bug in counters with increment - Fixed few other bugs - Fixed German translation =================================================================================================================================== 01/08/2008 10.0 ( Build 10.0.4.4 ) - Fixed few bugs - Upgraded Italian online manual - Added English online manual =================================================================================================================================== 22/07/2008 10.0 ( Build 10.0.4.3 ) - Grouped all sorting functions in "Print Set Up" - Added visualization of X and Y directions window in "Compile Favourites" - Fixed problem with jump on media 321 - Added visualization of holes and circular border on media 252/263 - Fixed translations =================================================================================================================================== 15/07/2008 10.0 ( Build 10.0.4.2 ) - Fixed problem with barcode linked to database in designer - Fixed position and size of holders and job details on all TPM-ROLL media - Added media N° 230 - Added visualization of holes on media 230/254/255/256 =================================================================================================================================== 10/07/2008 10.0 ( Build 10.0.4.1 ) - Fixed problem with multiple copies of universal counter - New model 2 of media 554 to print double data lines (for Wago Top Job) - Modified "Fast insert" window, with holder field - Added the auto sheet numbering function (in "Print Set Up") - Fixed media N° 4300 - Fixed problem with counter increment on modular media - Fixed translations in "Print Set Up" =================================================================================================================================== 03/07/2008 10.0 ( Build 10.0.3.12 ) - Fixed position Y in media N° 205/808/810 - Fixed English translation in "Print Set Up" =================================================================================================================================== 23/06/2008 10.0 ( Build 10.0.3.11 ) - Fixed few bugs in Designer =================================================================================================================================== 20/06/2008 10.0 ( Build 10.0.3.10 ) - Modified CVS import function for data on a single line - Fixed English translation in "Security Settings" =================================================================================================================================== 18/06/2008 10.0 ( Build 10.0.3.9 ) - Added offset x, offset y, font name and size columns in compile favourite report - Fixed Designer db fields =================================================================================================================================== 03/06/2008 10.0 ( Build 10.0.3.8 ) - Added a new counter procedure - Fixed Designer when open an older file =================================================================================================================================== 08/05/2008 10.0 ( Build 10.0.3.7 ) - Fixed Counter procedure =================================================================================================================================== 28/04/2008 10.0 ( Build 10.0.3.6 ) - Fixed Zoom function =================================================================================================================================== 10/04/2008 10.0 ( Build 10.0.3.5 ) - Added Zoom function into designer =================================================================================================================================== 07/04/2008 10.0 ( Build 10.0.3.4 ) - Fixed import procedure =================================================================================================================================== 27/03/2008 10.0 ( Build 10.0.3.3 ) - Fixed Counter procedure =================================================================================================================================== 17/03/2008 10.0 ( Build 10.0.3.2 ) - Added media N° 207 - Added media N° 331 - Added build version into about window =================================================================================================================================== 14/03/2008 10.0 ( Build 10.0.3.1 ) - - - - - - - - - - - =================================================================================================================================== 27/02/2008 9.0c ( Build 9.0.3.21 ) - Added procedure to print with modular step all media =================================================================================================================================== 26/02/2008 9.0c ( Build 9.0.3.20 ) - Fixed media N° 4603 =================================================================================================================================== 20/02/2008 9.0c ( Build 9.0.3.19 ) - Fixed media N° 263 - Fixed media N° 811 =================================================================================================================================== 18/02/2008 9.0c ( Build 9.0.3.18 ) - Fixed printer selection =================================================================================================================================== 09/02/2008 9.0c ( Build 9.0.3.17 ) - Fixed media N° 310 =================================================================================================================================== 23/10/2007 9.0c ( Build 9.0.3.16 ) - Added line spacing value - Changed barcode component =================================================================================================================================== 09/10/2007 9.0c ( Build 9.0.3.15 ) - Fixed counter into fast insert mode - Fixed "Bold" style =================================================================================================================================== 25/09/2007 9.0c ( Build 9.0.3.14 ) - Added filter "BMK" into import - Fixed media 328,329,330 with non metric O.S. =================================================================================================================================== 09/08/2007 9.0c ( Build 9.0.3.13 ) - Added Jump selection in " Print Setup " =================================================================================================================================== 08/08/2007 9.0c ( Build 9.0.3.12 ) - Changed the order of job details into media N° 4000, 4002, 4003, 4005 - Fixed into "Print Setup" functions "to separate group" and "to separate sets" - Fixed "Close" windows button into "Print Setup" - New SW code N° 1001 =================================================================================================================================== 01/08/2007 9.0c ( Build 9.0.3.11 ) - Fix counter procedure =====================================================================================================================================